Liquid Volumetric Fillers are one of the most accurate filling systems available today. The product is drawn by gravity suction into a product cylinder, where the measurement occurs, then is dispensed through a three-way valve out into the customer's container. This system is very accurate and repeatable.

The Simplex design handles flowable products, from water to tar, liquid and creams with up to 1 inch diameter particulates in a single cycle without crushing the product. Our machinery independently controls the precise flow-rate during the filling and recharging cycle.

Rugged built production machinery, SIMPLEX machines will be reliable for years of service to our customers.

Added Note:
To complete the basic machine as shown the following three items need to be selected from the OPTIONS list: Spouts, Product Cylinder, and Hopper or bulk adaptor.


Simplex Pressure Fillers are precision engineered to handle a wide variety of liquid products – from food to harsh acids, from foaming detergents to semi – viscous oils - and their unique design permits quick change-over from one container size to another.

The principle of operation is very simple. These machines fill under pressure in a closed loop system into the container. The product overfills then sucks back down to a level set by the operator.

Rugged built production machinery, SIMPLEX machines will be reliable for years of service to our customers.


Simplex offers a wide variety of container handling equipment to provide an automated system.

Simplex also offers specialty accessory equipment for the paint industry in handling can lidding and closing

Rugged built production machinery, SIMPLEX machines will be reliable for years of service to our customers.


Simplex table-top series machines refer to the Simplex line of machines that operate under a semi-automatic mode, or with options, can be fully automated.

Simplex table-top series machines come in two styles, electric and pneumatic.


These are electric cam driven volumetric piston filling machines. The cam varies the torque pushing/pulling the product through the machine. The product is drawn by gravity suction into a product cylinder, where the measurement occurs, then is dispensed through a three-way valve out into a container. This system provides for a gentle transition between the discharge and recharging of the machine. This system is very accurate and repeatable.

The Electric Series machine can control and vary the flow rate precisely during the filling cycle.


The Pneumatic Series machines are pneumatically driven. This is very good for high viscosity products, explosion proof environments, and situations like form, fill and seal machines where the container must be in control, or when the filling cycles begin. This machine can either be dependent or independent to an outside control source or signal. This machine can also be designed to fill two separate materials of different volumes into the same container.


This single head machine is compact and durable and recognized as a world standard for liquid, semi-solid and/or soft particulate filling. The Simplex table model AS-1 is a simple and accurate filling machine. Any manual AS-1 can be upgraded to be fully automatic at the factory. Some AS-1s have been in continuous operation for over 30 years. Economical and versatile the AS-1 is constructed of USDA approved materials, making it useful for many products and operations.

©2004—2015 SIMPLEX FILLER COMPANY. ALL RIGHTS RESERVED